Drywall tape or also called as mudding & taping should be done properly since it is where you will see whether your drywall job is good or bad. So, it is necessary to learn how to tape drywall properly to help you get your drywall installed perfectly.
Installing drywall tape in your wall is quite easy. You just need to start it by laying a strip of drywall tape along the seam of two pieces of drywall in your wall. After that, spread a thin layer of spackling compound over the seam and tape using a trowel. Allow it to dry thoroughly. After the layer dries completely, sand it with a sandpaper to smooth the surface. This will give you a better drywall in your home. How to tape drywall can be continued by applying another layer of spackling and again, you should let it dry thoroughly and then sand the compound.
Keep applying layer of spackling and compound while allowing each of it to dry until the seam is perfectly level with the rest of the drywall. So, this needs an accuracy and carefulness during the project. You should improve your patience to let each layer to dry and sand it before adding more layers to make the seams level. Installing tape drywall in your walls is about applying compound and sand it. If you have been working with your DIY projects for many years, this would be easy for you. even if you have no experience in a DIY project, this is still an easy job to do. You just need to learn how to apply the compound and sand it properly to get it completed perfectly and both of them are easy to learn.
Since how to tape drywall is easy, you do not need the help of a professional to install drywall tape in your home. Just try to do it yourself and you can even admire your own work. Simply applying and sanding compound you can make your drywall level with the seams. Be careful in applying the compound and make sure that each layer s dry completely before sanding for the best result.
Popular Post This Week